The highest containment classification for temporary vehicle restraint systems under EN 1317-2.
Region Note
This page covers Bull Barrier’s vehicle restraint and pedestrian protection applications in EN 1317 certified markets. In these markets, the system is available in both configurations: with the Reinforcement Bar for crash-tested vehicle restraint (EN 1317-2, T2, W6) and without the Reinforcement Bar for pedestrian protection and separation. For pedestrian and work zone separation applications in the USA and Canada, see USA & Canada.
EN 1317-2 Classification
Bull Barrier with the Reinforcement Bar has been independently crash-tested and classified under EN 1317-2, the European standard governing road restraint systems. The system achieved:
The maximum lateral displacement of the barrier during the crash test, measured from the traffic face to the furthest point reached by any part of the barrier during impact.
These classifications were achieved through independent crash testing at an accredited facility. The test report and certification documentation are available for download from the Technical Downloads page or upon request from our technical team.
Understanding EN 1317 Classifications
Bull Barrier with the Reinforcement Bar achieves T2 — the highest temporary containment level for temporary vehicle restraint systems under EN 1317-2. This means the system has been tested at the parameters defined in test basis TB 22 and demonstrated containment and redirection performance meeting the T2 requirement.
UK Procurement
UK Procurement
UK Procurement: CD377 and the Design Manual for Roads and Bridges
In the United Kingdom, the selection and specification of vehicle restraint systems for trunk roads and motorways is governed by CD377, part of the Design Manual for Roads and Bridges (DMRB) published by National Highways (formerly Highways England). CD377 sets out the requirements for temporary and permanent road restraint systems, including containment level requirements by road type and risk assessment.
Bull Barrier is applicable for use under CD377 in appropriate scheme classifications where T2 containment is specified for temporary vehicle restraint. Specifiers should refer to the current edition of CD377 and consult with Bull Barrier’s technical team to confirm suitability for specific scheme requirements.


Vehicle Restraint Applications
With the Reinforcement Bar installed, Bull Barrier provides crash-tested vehicle containment for lane closures and contraflows, long-duration maintenance and construction schemes, bridge works, tunnel approaches, and emergency road closures requiring rapid deployment.
Read More
Pedestrian Protection Applications
Without the Reinforcement Bar, Bull Barrier provides robust pedestrian protection and separation for urban street works, utility trenching and service installations, temporary pedestrian diversions alongside live traffic, and construction site boundaries in public-facing environments.
This configuration is available in all EN 1317 markets alongside the vehicle restraint configuration, giving operators and rental fleets the flexibility to deploy the same base product across both vehicle and pedestrian applications.
Read LessDistribution and Availability
Bull Barrier is established across the United Kingdom and expanding throughout mainland Europe. The system is deployed by leading equipment rental companies, contractors, traffic management providers, and local government across the region.
European distribution is expanding through selected partners in key territories, aligned with local EN 1317 regulatory frameworks and operational requirements. The full product range — vehicle restraint and pedestrian protection — is available throughout EN 1317 markets.
Frequently Asked Questions
What does EN 1317 T2 mean?
T2 is a containment level classification under EN 1317-2, the European standard for road restraint systems. It denotes a temporary vehicle restraint system that has been crash-tested to test basis TB 22 and demonstrated the ability to contain and redirect an impacting vehicle at the specified test parameters. T2 is the highest containment classification for temporary barriers under EN 1317-2.
What is working width W6?
Working width is the maximum lateral displacement of the barrier during a crash test, measured from the traffic-side face of the barrier to the furthest point reached by any part of the barrier or the impacting vehicle during the test. W6 is the working width class achieved by Bull Barrier, indicating the space required behind the barrier to accommodate its dynamic deflection during an impact.
Is Bull Barrier approved for UK motorway use?
Bull Barrier with the Reinforcement Bar is classified to EN 1317-2 (T2, W6) and is applicable for use under CD377 (Design Manual for Roads and Bridges) in appropriate scheme classifications. Suitability for a specific motorway scheme depends on the containment level and working width requirements set out in the risk assessment and scheme design. Contact our technical team to discuss specific project requirements.
What speed and impact angle was the crash test performed at?
Bull Barrier was crash-tested to the parameters defined in test basis TB 22 under EN 1317-2. The specific speed, impact angle, and vehicle mass parameters are set by the standard and documented in the crash test report. Contact our technical team or download the crash test summary from the Technical Downloads page for full test parameter details.
Do I need the Reinforcement Bar for every deployment?
No. The Reinforcement Bar is required only when Bull Barrier is deployed as a vehicle restraint system. For pedestrian protection, separation, perimeter control, and event crowd management applications, the Base Section barrier line without the Reinforcement Bar provides robust physical protection. The choice of configuration depends on the site risk assessment and the protection requirement.
Which countries specify EN 1317 for temporary barriers?
EN 1317 is the harmonized European standard for road restraint systems and is specified for temporary vehicle restraint in most European Union and European Economic Area member states, as well as in the United Kingdom. Individual countries may have additional national guidance documents (such as CD377 in the UK) that set out how EN 1317 classifications are applied in procurement and specification.

